16
5 4 Operating unit
CAUTION - Plug-in contacts must be dry!
Attach the operating unit
holder
Push the operating unit into
the bracket and secure with
the ball knob
Plug the other end of the
spiral cable into the socket
on the control unit
5 5 Anti-tip supports
WARNING - Never use without both anti-tip supports to prevent the wheelchair from tipping
backwards!
WARNING - Check the anti-tip supports before initial operation to ensure safety!
If anti-tip supports are not available on your wheelchair as standard, use AAT anti-tip supports in pairs!
The wheelchair bracket determines which anti-tip supports you require. The type of holder you should
attach to your wheelchair depends on the model of your wheelchair.
Option 1: Bracket with locking bolts
Remove bracket locking
bolts
Push the anti-tip support into
the bracket and secure with
the locking pin
Observe the markings
Repeat process on the other
side