Proximity card reader –
Installation manual
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
All rights reserved.
3
READER INSTALLATION
Separate the back cover with holes and use as a template
Drill 2 holes (A, C) in the wall of the bolt and one under the cable
Insert the bolt holes (A, C) attached dowels
Screw the rear part of the housing to the wall using the screws
Bring out the controller cables through the hole (B)
Mount the reader on the base and secure it from below with a special
screw
Wiring Diagram
Red
+12V DC
Black
GND
Green
D0
White
D1
Brown
LED
Yellow
Buzzer
Change card Wiegand output format procedure (only for model KDH
-
CK330):
-
26 bit Wiegand (Unique, Mifare)
-
* 8 8 8 8 8 8 # 7 2
26
# * *
-
exit
-
34 bit Wiegand (Unique, Mifare)
-
* 8 8 8 8 8 8 # 7 2
34
# * *
-
exit
-
26 & 37 bits (HID Prox)
-
automatic, depend of card number
Change PIN output format procedure:
-
Virtual card number format
-
* 8 8 8 8 8 8 # 7 3 0 # * *
-
exit
-
4 bit format (KaDe)
-
* 8 8 8 8 8 8 # 7 3 1 # * *
-
exit
-
8 bit format (Kantech)
-
* 8 8 8 8 8 8 # 7 3 2 # * *
-
exit
Reader
