9
Symbol
Explanation
CE marking
Position: Type plate
The product complies with the relevant provisions of the EC Machinery
Directive 2006/42/EC.
SN
SN
Position: Type plate
Serial number of the product (e.g. C120XXXXXXX)
Manufacturer
Position: Type plate
Indicates the manufacturer of the product (AAT Alber Antriebstechnik
GmbH)
Barcode
Position: Type plate
Contains the AAT serial number
Date of manufacture
Position: Type plate
Indicates the year the medical device was manufactured.
TÜV Süd NRTL test mark
Position: Drive unit, left side
Refers to the fact that the product has been tested for state-of-the-art
technology, as well as for electrical and mechanical safety by TÜV
SÜD Product Service GmbH. The NRTL certification provides clear ev
-
idence that the product meets the requirements of the North American
market.
Adhesive label on the drive unit (below the membrane keypad)
Observe the user manual!
WARNING: rotating / moving parts!
Operation only by one trained person!
Activate the safety brakes on the stairs and check them before each
use.
Lifting capacity max. 120 kg!
WARNING: Risk of crushing!
May cause injury and/or damage to the device.
Do not step on this surface.
Adhesive label on climbing leg
WARNING: Do not reach in
Serious injuries to hands or fingers possible.
Keep hands away from the climbing leg.
Adhesive label Note - No handle
Position: Front part, back of drive unit
DANGER
Parts in movement
i
NOTE
- All symbols and adhesive labels listed in this chapter can be found on the Cargo Master
C120 in the respective national language! The exact position on the device is listed in the de-
scription of the adhesive labels as well as in the following labelling plan.
3 Explanation of the symbols on the device (applicable for the EU)
