8.2.2
Charging cable
A charging cable for your vehicle is available as an accessory. Approximate-
ly a recharge of 80% is possible by accessing your vehicle’s battery using a
charging cable. Connector
fits to the cigarette lighter; plug in connector
at the battery pack.
F
Before using the charging cable, please read and follow all instruc-
tions and warning notes included with the charging cable.
F
Exclusively use the AAT Alber Antriebstechnik GmbH charging ca-
ble!
F
Check the charging cable regularly and protect it from oil, grease,
aggressive cleaning agents, thinners and/or damage by sharp edges,
etc.
F
Repairs and service check-ups may only be performed by AAT Alber
Antriebstechnik GmbH or their authorized personnel.
8.3
Battery pack
The quick release battery pack, consisting of sealed lead acid batteries,
should be recharged after each use. (Technical details for the sealed lead
acid batteries you find in chapter 8.3.1).
The battery pack is subject to a so-called self-discharge. Therefore, you
should connect the battery pack to the charger whenever possible. Due to
the fact that the battery pack automatically goes into charge retention as
soon as it is fully charged, an overcharge is impossible.
If your battery pack does not possess its full capacity yet, the reason may be
that a new battery pack reaches its full capacity only after several char-
ging/discharging cycles.
If fully charged batteries discharge more quickly as before, they are probably
used up. In such case, please have your authorized dealer check and repla-
ce them, if necessary.
Tip:
F
If the
C
-max
is at a standstill for some time, please connect it to the
charger to retain the charge. This does not damage the sealed lead
acid batteries, on the contrary, it increases their durability.
33
c
-
max
160 kg
