background image

General Information

41-001024-00, Rev 09, Release 1.4.1

3

SIP IP Phone Models 480i, 480i CT, 9112i, 9133i Release Notes

Upgrade Notes

This section provides notes that customers should be aware of before upgrading to 
IP phone firmware release 1.4.1. Aastra Telecom recommends that customers read 
this section completely and thoroughly prior to the upgrade to avoid any known 
issues with the upgrade process.

The recommended base IP Phone firmware to upgrade to this new firmware 
release is 1.2.2 or above.

Users who previously adjusted the audio transmit and receive gains for the 
Aastra IP Phones should reset the values to "0" and re-tune their phones again 
with release 1.4.1 if necessary. This is required to avoid high transmit levels 
heard by the far-end after upgrading to 1.4.1. To set audio transmit and 
receive gains in the 1.4.1 configuration files, see the SIP IP Phone 
Administrator Guide Release 1.4 or the SIP IP Phone Release Notes Version 
1.3.1. 

Users upgrading from release 1.2.2 to 1.4.1 may experience post-upgrade 
configuration issues IF they previously configured their phones solely using 
the telephone user interface or Aastra Web user interface. Users may need to 
reconfigure their settings again after the upgrade due to new file system 
enhancements. This issue does not affect customers who configure their 
phones using a TFTP/FTP/HTTP server.

Users who wish to downgrade from release 1.4.1 to 1.2 must downgrade to 
release 1.2.2 prior to downgrading to release 1.2, in order to restore file 
system structure. Failure to downgrade to version 1.2.2 first may result in 
configuration parameters being ignored.

Summary of Contents for VentureIP 480i





























































Reviews: