Aastra Dialog 4425 User Manual Download

Page: 4 / 153

Welcome

BusinessPhone – Dialog 4425 IP Vision

Welcome

Welcome to the User Guide for the Dialog 4425 IP Vision in the

BusinessPhone Communication Platform from Aastra. The

BusinessPhone Communication Platform consists of

BusinessPhone Compact, BusinessPhone 50,

BusinessPhone 128i and BusinessPhone 250.
The features described in this User Guide are related to version 8.0

or higher of the BusinessPhone Communication Platform. Some

might not work in earlier versions of the system and/or might be

protected by a hardware dongle that has to be bought separately.
The User Guide describes the facilities of the BusinessPhone

Communication Platform and the Aastra Dialog 4425 IP Vision with

a default programming. There may be some differences in the way

your phone is programmed. Please consult your system

administrator if you need further information.

Note:

The Aastra Dialog 4425 phone exists in two versions,

i.e. version 1 and version 2. Underneath the telephone,

version 1 is marked DBC 425 01 and version 2 is marked

DBC 425 02. Check to see which version you are using.

The latest version of this User Guide can also be downloaded from:

http://www.aastra.com

Note:

Dialog 4425 IP Vision is an IP telephone conforming

to the H.323 standard, i.e. it can only be used with a local

area network (LAN) that supports this type of telephone.

The Dialog 4425 IP Vision supports the Dynamic Host

Configuration Protocol (DHCP) for determination of IP

addresses. If DHCP is not supported by the LAN, please

contact your system administrator.

Summary of Contents for Dialog 4425

























































































































































Search results

Summary of Contents for Dialog 4425

Reviews:

Related manuals for Dialog 4425

Brands by name

Popular brands

Aastra Dialog 4425, User Manual

Search results

Summary of Contents for Dialog 4425

Reviews:

Related manuals for Dialog 4425

Brands by name

Popular brands