background image

5

Dialog 4106 Basic/Dialog 4147 Medium

General Information

General Information

The latest version of this user guide can be downloaded from: 

http://www.aastra.com

Copyright

All rights reserved. No parts of this publication may be reproduced, 

stored in retrieval systems, or transmitted in any form or by any 

means, electronic, mechanical, photocopying, recording or other-

wise, without prior written permission of the publisher except in 

accordance with the following terms.
If this publication is made available on Aastra media, Aastra gives 

its consent to downloading and printing copies of the content 

provided in this file only for private use and not for redistribution. No 

parts of this publication may be subject to alteration, modification 

or commercial use. Aastra will not be liable for any damages arising 

from use of an illegal modified or altered publication.
Aastra is a registered trademark of Aastra Technologies Limited. All 

other trademarks mentioned herein are the property of their 

respective owners.

Warranty

AASTRA MAKES NO WARRANTY OF ANY KIND WITH REGARD 

TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE 

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 

FOR A PARTICULAR PURPOSE. Aastra shall not be liable for 

errors contained herein nor for incidental or consequential damages 

in connection with the furnishing, performance or use of this material.

Summary of Contents for Dialog 4106 Basic




































Reviews: