background image

 

SOFTWARE LICENSE AGREEMENT

 

Aastra Telecom Inc., hereinafter known as "Seller", grants to Customer a per-
sonal, worldwide, non-transferable, non-sublicenseable and non-exclusive, 
restricted use license to use Software in object form solely with the Equipment for 
which the Software was intended. This Product may integrate programs, licensed 
to Aastra by third party Suppliers, for distribution under the terms of this agree-
ment. These programs are confidential and proprietary, and are protected as such 
by copyright law as unpublished works and by international treaties to the fullest 
extent under the applicable law of the jurisdiction of the Customer. In addition, 
these confidential and proprietary programs are works conforming to the require-
ments of Section 401 of title 17 of the United States Code. Customer shall not dis-
close to any third party such confidential and proprietary programs and 
information and shall not export licensed Software to any country except in accor-
dance with United States Export laws and restrictions.

Customer agrees to not reverse engineer, decompile, disassemble or display Soft-
ware furnished in object code form. Customer shall not modify, copy, reproduce, 
distribute, transcribe, translate or reduce to electronic medium or machine read-
able form or language, derive source code without the express written consent of 
the Seller and its Suppliers, or disseminate or otherwise disclose the Software to 
third parties. All Software furnished hereunder (whether or not part of firmware), 
including all copies thereof, are and shall remain the property of Seller and its 
Suppliers and are subject to the terms and conditions of this agreement. All rights 
reserved.   

Customer's use of this software shall be deemed to reflect Customer's agreement 
to abide by the terms and conditions contained herein. Removal or modification of 
trademarks, copyright notices, logos, etc., or the use of Software on any Equip-
ment other than that for which it is intended, or any other material breach of this 
Agreement, shall automatically terminate this license. If this Agreement is termi-
nated for breach, Customer shall immediately discontinue use and destroy or 
return to Seller all licensed software and other confidential or proprietary informa-
tion of Seller. In no event shall Seller or its suppliers or licensors be liable for any 
damages whatsoever (including without limitation, damages for loss of business 
profits, business interruption, loss of business information, other pecuniary loss, 
or consequential damages) arising out of the use of or inability to use the soft-
ware, even if Seller has been advised of the possibility of such damages.

Summary of Contents for 9112I
















Reviews: