Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014
A-133
SIP Diversion Display
Global Setting
Parameter
–
bellcore cadence dr4
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Sets the cadence for Bellcore-dr4.
Note:
You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format
Integer
Default Value
300,200,1000,200,300,4000
Range
Not Applicable
Example
bellcore cadence dr4: 300,200,1000,200,300,300,200,4000
Parameter
–
bellcore cadence dr5
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Sets the cadence for Bellcore-dr5.
Note:
You can define up to 8 cadence rings. The value of -1 indicates “do not repeat”.
Format
Integer
Default Value
500,-1
Range
Not Applicable
Example
bellcore cadence dr5: 500,-1
Parameter
–
sip diversion display
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
If enabled, when an outgoing call is being diverted to another destination the phone displays
the Caller ID of the new destination and the reason for the call diversion. Similarly, for incom-
ing diverted calls, the Caller ID of the original call destination displays.
If disabled, the reason for the call diversion on outgoing diverted calls, and the Caller ID of the
original call destination on incoming diverted calls is not displayed.
Note:
•
This is a global parameter.
•
You must restart the phone after setting a value for this parameter.
Format
Boolean
Default Value
1
Range
0 (disabled)
1 (enabled)
Example
sip diversion display: 0