TR-069 Protocol Support
12
41-001373-01 REV02 – 05.2014
Factory Reset
The purpose of a factory reset is to restore the configuration to default when it is requested by the ACS server. From the
ACS server, make a “factory reset” request. This will set all the parameters to the default value.
Device Data Model Support
For this release, the phones support only the configuration parameters listed in the section,
“TR-069 Functionality Sup-
port”
on
page 2
, for remote management through the TR-069 Protocol. Some ACS’s (e.g. a specific home management
device) requires a vendor-specific device data model in XML format before the IP phones can connect to it. See
“Appen-
dix B - XML Data Model”
on
page B-1
for an example of an XML data model.
As defined in this data structure, some parameters have write privileges and can be changed remotely (e.g. DNSServer).
However, you may have to reboot the phone in order for the change to take effect.
OUI and Product Class
The above data structure is common across all the TR-069 supported Aastra SIP phones. The table below summarizes the
supported phones and their corresponding OUI and Product Class.
Note:
A factory reset will result in the phone clearing out all configured parameters, including the TR-069 configured settings.
Supported Aastra Models
OUI
Product Class
6730i
00085D
6730i
6731i
00085D
6731i
6735i
00085D
6735i
6737i
00085D
6737i
6739i
00085D
6739i
6753i
00085D
6753i
6755i
00085D
6755i
6757i
00085D
6757i
6863i
00085D
6863i
6865i
00085D
6865i
6867i
00085D
6867i
9143i
00085D
9143i
9480i
00085D
9480i
