Copyright © 2015 AAS Technology
AH-12K
www.AAS.com.tw
2
R201605-V12
Panel View
..
VPHP15-08
VPH-100T
Installation
..
1.
Make sure any signal source (camera) and/or monitor/DVR are turned off during installation.
2.
Use DB15 to BNC cable to connect DVR and Transceiver.
3.
Use network cable to connect DVR and Transceiver.
4.
Connect cameras with receiver.
5.
Check whether installation is good and power the device(s).
6.
Power camera, DVR, monitor, etc.
Specification
..
8CH Power & HD Video UTP Transceiver
Model
VPHP15-08
Transmission & Video
Properties
Transmission Channel
8 Channels
Video Output
1x DB15 (DB15 to BNC-M, 30cm Pigtail Cable included)
Video In / Power Output
8x RJ45
Transmission Distance
Refer to ‘Table-1’ and ‘Table-2’ below
Power Output
12~15V DC Total <100W (each port <12W)
Compatible Video Format
HD TVI, HD CVI, AHD / PAL, NTSC, SECAM
Signal Transmission Band
0~70MHz
Anti-interference
>60dB
Protection Level
Coaxial Video Connector Surge
2KV per
：
IEC61000-4-5
UTP Cable Communication
Connector Surge Protection
2KV (different mode) ; 4KV (common mode)
per:IEC61000-4-5
ESD
Contact Discharge: 6000V ; Air Discharge: 8000V
Per: IEC61000-4-2 1995
Operation Environment
Operation Temperature
-10°C~50°C / 14°F~122°F
Storage Temperature
-40°C~85°C / -40°F~185°F
Humidity
0~95%
Physical Properties
Dimension (L x W x H)
310 x 232 x 45 mm / 12.2 x 9.1 x 1.78 inches
Housing Material
Iron Metal and Plastic
Color
Black
Net Weight
1.41 kg / 3.12 lbs
*Specifications are subject to change without notice
NO.
Component
Description
1
Power LED
Indicate if power supply is
normal
2
Power
Supply
Input
100V~240V 50-60Hz
power input connector
3
RJ45
The green LED light on
indicates working status
The yellow LED light on
indicates over-current
protection
4
VGA
Video output
BNC-M
DC-M
