4 of 4
QUICK START
GUIDE
Copyright © Security Brands, Inc.
QSG-16X1-EN Rev. D (12/2015)
3a
Connect wires to unit as shown in
Step 3.
3b
Connect wires to your power source,
making sure you connect positive to
positive and negative to negative.
CAUTION!
Double check that you’ve wired from
positive on Ascent X1 to positive on your
power source and negative on Ascent X1
to negative on your power source.
Reverse polarity can damage Ascent!
1
Slide SIM card holder in OPEN
direction and lift to swing open.
2
Remove existing SIM card and install
new SIM card.
3
Swing cover back down completely
and slide in CLOSE direction to lock.
Installing
Custom
SIM Card
(Optional)
Using a
Third-Party
Power Source
(Optional)
IMPORTANT!
r
If you would like to use a third-party
power source, such as solar, verify that
it conforms to the following specs:
Input
12–24 VAC / VDC
must be within ±10%
Current Draw
less than 100 mA @ 12 VDC
less than 75 mA @ 24 VDC
?
Contact us at
(844) 259-8265
or visit
summitcontrol.com/contact
NEED HELP?
