4 of 4
QSG-16T1-EN Rev. B (9/2016)
1
Slide SIM card holder in OPEN
direction and lift to swing open.
2
Remove existing SIM card and install
new SIM card.
3
Swing cover back down completely
and slide in CLOSE direction to lock.
Installing a
Custom
SIM Card
(Optional)
?
NEED HELP
QUICK START
GUIDE
Call us at
(844) 259-8265
or visit
summitcontrol.com/contact
We are available
Mon–Fri
/
8am–5pm Central
.
© 2016 Security Brands, Inc.
3a
Connect wires to unit as shown in
Step 3.
3b
Connect wires to your power source,
making sure you connect positive to
positive and negative to negative.
CAUTION!
Double check that you’ve wired from
positive on Ascent to positive on your
power source and negative on Ascent to
negative on your power source.
Reverse polarity can damage Ascent!
Using a
Third-Party
Power Source
(Optional)
IMPORTANT!
r
If you would like to use a third-party
power source, such as solar, verify that
it conforms to the following specs:
Input
12–24 VAC/DC
no more than 10% under or over
Current Draw
less than 90 mA @ 12 VDC
less than 60 mA @ 24 VDC
