background image

26

Arley Wood & Multifuel Stoves

INSTALLATION

CHECKLIST

Hearths, Fireplaces, Flues and chimneys

This checklist is to ensure hearths, fireplaces, flues and chimneys are satisfactory, and to show what you have done to comply with the 

requirements of The Building Regulations 2000 Approved Document J 2002. 

1.   Building address, where work has been carried out.......................................................................................................................................

.........................................................................................................................................................................................................................

2.  Identification of hearth, fireplace chimney or flue

3.  Firing capability: solid fuel/gas/.

4.  Intended type of appliance.

State model and output.

5.  Ventilation provisions for the appliance:

State type and area of permanently open vents.

6.  Chimney or flue construction

a)  State the type or make and whether new or existing.

b)  internal flue size (and equivalent height, where 

calculated - natural draught gas appliances only).

c)  If clay or concrete flue liners used confirm that they are

correctly jointed with socket end uppermost and 
state jointing materials used.

d)  If an existing chimney has been refurbished with a

new liner, type or make of liner fitted.

e)  Details of flue outlet terminal and diagram reference.

Outlet Details:

Complies with:

f)  Number and angle of bends.

g)  Provision for cleaning and recommended frequency.

7.  Hearth. Form of construction. New or existing?

8.  Inspection and testing after completion

Tests carried out by:
Tests and results

Flue

visual

inspection

sweeping

coring ball

smoke

Appliance (where included) spillage

I/we the undersigned confirm that the above details are correct. In my opinion, these works comply with the relevant requirements in
Part J of Schedule 1 to the Building regulations.

Print name and title....................................................................................................Profession..........................................................................

Capacity......................................................................................................................Telephone..........................................................................

Address............................................................................................................................................................Post code.......................................

Signed........................................................................................................Date.................................

Registered membership of..(e.g. CORGI, OFTEC, HETAS, NACE, NACS)............................................

Summary of Contents for Arley

































Reviews: