200 WATT BAND II VHF FM POWER AMPLIFIER
4
1.4 Electromagnetic Compatibility
This product complies with EMC directive EN 301 489 – 11 of the European Union.
To meet this directive you must follow the wiring instructions
1.5 Intended Use
This equipment is intended for use as a RF power amplifier and should only be
connected to a suitable driver transmitter and a suitable antenna that ideally
presents 50 ohm load (SWR < 1.4 16dB return loss) at the operating frequency.
This equipment is intended for use permanently at a pre-defined location with a
license or authorisation from the radio spectrum regulator of the EU member state.
This equipment is not intended for installation by an unqualified end user, the
installer must have competent RF engineering skills and EMC knowledge at
their disposal. The whole transmission system, including the antenna system and
external audio limiting, should be installed in accordance with document
ETR132, a copy of this is available at
http://www.aareff.com/ETR132.pdf
2. PACKAGE CONTENTS
Quantity Description
1
19 Inch Rack Mount 200 Watt Amplifier
1
Mains AC Cord With IEC Type Connector
1
Short 50 Ohm RG58 Cable Terminated With BNC Connectors
