Aardee AREPC-600, User Manual

Page: 7 / 12

Note: If rubber seal ring is damaged, do not use the pressure cooker. Contact customer
service
5.
Close the lid
6.
Hold the handle and turn it counter-clockwise. Clamping sound will be heard (20 & 21)
7.
Adjust pressure limiting valve to the air tight position and ensure that the float valve sinks
(22-a & 22-b)
How to use the menu buttons
There are five menu buttons programmed on the appliance. Each button is programmed to
detect the weight of food being cooked and how much liquid is inside the pot.
1. Prepare desired dish and place into cooking pot.
2. Secure the lid onto the unit, turn it counter-clockwise to lock it properly in place.
3. Make sure the pressure limiting valve is set to the airtight position.
4. Plug the power cord into a 110-120V power outlet.
5. The LCD screen will display
0 00.
6. Choose the desired menu button. Once you press the selected button, the indicator light
will illuminate. The pressure cooker will begin to operate. No need to press the START
button.
7. If proper pressure is achieved, the LCD screen will display P 00
8. When the unit has pressurized, it will begin to pressure-cook the food. You may hear quiet
hissing or sizzling sounds coming from the inside of the unit during this time.
9. When cooking has completed, pressure cooker will beep three times and automatically
go to keep warm .
10. The keep warm light will begin to flash/flicker. This means the pressure cooker is naturally
releasing the pressure and it will take approximately 10-15 minutes.
11. If you wish to Quick Release the pressure, move the pressure limiting valve to ‘exhaust’
position to release the pressure until float valve sinks.
4