Aardee ARCM-550-MC, User Manual

Page: 3 / 44

Please take time to read these safety precautions carefully before
connecting your machine to the power supply. It is essential to follow
them and the operating instructions.
− First read this entire operating manual.
− Danger of electric shock! Never immerse the machine in water or any
other liquid.
– Connect only to a properly grounded power point.
– To make sure that the machine is switched off, remove the plug from
the power point.
− Always pull out the power plug before:
* Relocating the machine.
* Cleaning or maintenance.
* Long periods of disuse.
− Never clamp or run the power cable over sharp corners or edges.
− Danger of electric shock! Damaged power cables may only be
replaced at the customer service centre.
− Danger of electric shock! Never touch the power plug/socket/cable or
the machine with damp or wet hands. Never unplug by pulling out the
power cable; always remove the plug.
− If you need an extension cable, make sure it is suitable for your
machine (3-pole grounded, 1.5 mm2 conductor cross-section), and
lay the cable to avoid tripping.
− Danger of scalding! Never move the machine during operation!
− Never operate the machine without water
− Always make sure there is water in water tank not less than minimum
level.
− Danger of burning! Never touch very hot parts of the machine (e.g.
brew unit during operations).
− Danger of scalding! Do not touch the steam or water jets.
− Danger of scalding! Do not move the operating lever when the
machine is still under pressure making Coffee .
− Do not use the machine in case of:
* Faulty operation.
* Damaged power cable.
* After falling or other damage.
* In such cases immediately have the machine checked and
repaired if necessary at the customer service centre.
1. Safety precautions
3