Local Edit Mode gives you the ability to adjust some individual keypad functionality.
Including:12/24 hour time, Temperature display, KP Tamper, KP software version, KP Address,
Calibrate Temperature, Backlight Brightness, Display Contrast and Beeper Tone.
To
Enter
Local Edit Mode, please press then then
The display will then read
To
Exit
Local Edit Mode, please press then
Once in Local Edit Mode use the programming addresses below to make changes if required.
P= E =
To Increase press
To Decrease press
P 900 E
1 ON
= 12-hour clock,
1 OFF
= 24-hour clock
2 ON
= Clock and Temperature displayed alternatively,
2 OFF
= Clock Only
3 ON
= Display Temperature when ENTER button is pressed,
3 OFF
= Feature disabled
4 ON
= Enable Keypad Tamper
(Not available on this Keypad)
5 ON
= All Lights will turn off after 90seconds of inactivity.
P 901 E
Keypad Software Version,
the KP current software version will be displayed.
P 902 E
Keypad Address
(1-8)
keypads on the same system must each have a different address
P 903 E
Calibrate Temperature Sensor
,
the current temperature will be displayed.
(
Warning
don’t adjust this location unless you have a calibrated temperature source available )
P 904 E
Backlight Brightness
,
display will read to adjust press or
P 905 E
LCD Contrast
,
display will read to adjust press or
P 906 E
Buzzer Tone
,
display will read to adjust press or
P 920 E
Default
all Keypad Local Edit Programming Options will be returned to factory default.
Note
, after adjusting any programming options, must be pressed to save changes.
*You can not access Local Edit Mode if the system is Armed or Stay Armed
Page 3/8
Lights Out Mode:
This great little feature is perfect if you find the keypad backlight is too bright,
when installed in a bedroom. If option
5
is turned On under
Local Edit Mode
address
P 900 E
, the
backlight behind the display and the buttons will turn off, after 90 seconds of no zone activity. If a
zone is then triggered the backlight will come back on for 90 seconds. The backlight will also come
back on if a button is pressed.
Easier Programming:
We’ve added a simple step through ability to commonly used programming
addresses. For example enrolling Radio pendants, start like normal in program mode then P 18 E 21 E
once the first slot is loaded, pressing will step you to the next slot for loading and so on.
This feature works on most addresses, such as user codes, user permissions, phone numbers & more
