13
Adjust the Volume
• Press the
VOL +/–
buttons on the unit or on the remote control to adjust the volume.
• If you wish to turn the sound off, press the
MUTE
button on the remote control. Press the
MUTE
button again or press the
VOL +/-
buttons to resume normal listening.
Select equaliser (EQ) effect
- While playing, press the
FLAT, CINEMA, SONG
buttons on the remote control to select preset
equalisers.
AUX/LINE IN/OPTICAL/COAXIAL/HDMI ARC
Operation
1 Ensure that the unit is connected to the TV or audio device.
2 While in ON mode, press the
/
button on the main unit repeatedly or the
AUX, LINE IN,
OPTICAL, COAXIAL, HDMI ARC
button on the remote control to select the desired mode.
3 Operate your audio device directly for playback features.
4 Press the
VOL
+/–
button to adjust the volume to your desired level.
•
Tip:
While in
OPTICAL/COAXIAL/HDMI ARC
mode, if there’s no sound output from the unit, you
may need to activate
PCM
Signal output on your source device (eg. TV, DVD or Blu-ray player).
Bluetooth Operation
You can listen to tracks from a media device if connected to the unit via Bluetooth.
Pair Bluetooth-enabled Devices
The first time you connect your bluetooth device to this player, you need to pair your device to this
player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
1 Press the /
button on the unit repeatedly or press the
BT
button
on the
remote control to
select
Bluetooth
mode. Display panel shows “
bt
”, then shows “
No bt
” to enter pairing mode (if
there’s no Bluetooth device connected).
2 Activate your Bluetooth device and select the search mode. “
A&S Bar 200
” will appear on your
Bluetooth device list.
- If you cannot find the soundbar, press and hold the
BF
/
PAIR
button on the remote control to
be searchable. After the
“Pairing”
voice prompt.
3 Select “
A&S Bar 200
” in the pairing list. After the “
Paired
” voice prompt, the system is successfully
connected and the display panel shows “
bt
”.
4 Play music from the connected device.
