Benches (2)
Top (1)
HARDWARE
(included)
2¾
”
Bolts (8)
2”
Lag Screws (4)
Flat Washers (4)
Allen Wrench (1)
TOOLS NEEDED
Hammer
7
/
16
”
Wrench or Socket
Legs (2)
Braces (2)
STEP 2
Set the table upright and lay the benches across the top of the legs. Insert a 2¾
”
bolt through the 2x2 on
the bench & turn into the threaded insert in the legs. Tighten with the Allen wrench.
b
c
a
a
a
a
b
b
d
PARTS
STEP 3
Lay the table upside down again & attach the braces. Place one end of the brace in the center of the table
top & other end flush with top of leg brace. Put a ¼
”
washer on a
2”
lag screw & turn in with
7
/
16
”
wrench or
socket. (Holes are not predrilled as lags are self drilling.)
STEP 1
Lay the top upside down on a clean, level surface. Set the legs on inside of the 2x2 strips attached to the
top. Insert two 2¾
”
bolts through the predrilled holes in the 2x2 strips & turn into the threaded inserts in the
top of the legs. Tighten with the Allen wrench.
D
D
c
c
