PARTS
(included)
Chair Seat (1)
Chair Base (1)
¼
”
x 1¾
”
Bolts (4)
Flange Nuts (4)
Allen Wrench (1)
TOOLS NEEDED
7/16”
Wrench
b
c
a
STEP 1
Place the chair seat on the base and lift the front of the seat up a little bit. (See photo 1.) Insert 2 bolts
through the swivel and push them down through the predrilled holes in the base. (See photo 2.) Now you
will need to spin the seat around a half turn to repeat the procedure in the back (the swivel bracket is
angled and has a wider opening on one side. Therefore, you need to spin the seat partway around for the
last 2 bolts).
STEP 2
You should now have 4 bolts sticking down through the bottom of the base. (See photo 3.) Attach the
flange nuts and tighten with
7/16”
wrench. (See photo 4.)
HARDWARE
(included)
photo 1
photo 2
photo 3
photo 4
A
B
a
a
b
b
b
b
