PARTS
(included)
Headboard (1)
Footboard (1)
Headboard Posts (2)
Side Rails (2)
Mattress Boards (5)
4¾
”
Bolts (4)
Joint Connector Bolts (8)
1¾
”
Woodscrews (20)
Allen Wrench (1)
Square Drive Bit (1)
TOOLS NEEDED
Screwgun
STEP 1
To attach the headboard posts to the headboard, insert the screw attached to the post into the headboard
cap & slide in against the headboard. (See photo 1.) If the screw is too tight or too loose you can adjust it
with the Allen wrench. Next insert the 4¾
”
bolts through the posts & screw into the headboard. Tighten the
bolts using the Allen wrench. (See photos 2 & 3.) Note: Make sure the notches in the posts are on the
same side.
HARDWARE
(included)
C
B
A
b
e
a
c
d
STEP 2
Attach the side rails to the headboard & footboard. Place the side rails in the notch in the posts with the
hanger bolts going in the predrilled holes & fasten with the 8 joint connector bolts. Tighten with the Allen
wrench. (See photos 4 & 5.)
photo 1
photo 2
C
b
C
C
a
a
photo 3
photo 4
A
A
D
D
photo 5
