Fig. 3
Front
Back
7. Mount the canopy assembly to the ROPS using (4) 1/2” u-bolts, (4) 1/2” washers, and (4) 1/2” lock nuts
.
Please note that your kit is provided with 2 different size u-bolts to accommodate 2 1/2” - 3” ROPS, use
the best fitting for your application. Insert the u-bolts around the ROPS frame and into the side frames of the
ROPS. Once all u-bolts are in place, level the ROPS and secure the nuts.
6. The top bracket will attach to the canopy frame using (4) 3/8” bolts. There are multiple positions to attach
the brackets to the canopy frame, this is determined by the angle of the ROPS and personal preference. If the
ROPS angles forward, use holes towards the center of the canopy frame. If the ROPS angles to the rear, use
holes towards the rear of the canopy frame.
Fig. 5
Revised
7/18/18
