INSTALLATION PROCEDURES
Your A&I tractor canopy will fit Roll Over Protection Systems (ROPS) that are 31.56” and 32.28” in overall
width with frames that are 2’ - 2.36” in size. It is also designed to fit ROPS that are angled up to 33° forward
or backwards.
1. Measure the overall width of the ROPS to determine the bracket configuration. If the width measures 31.56”
then the side plates need to be attached to the frame from the inside as picuted above,
Section View A
. If
the width measures 32.28”, the side plates need to be attached from the outside of the canopy frame as
pictured above,
Section View B
.
Fig. 1
Section View A
Section View B
