A&D UC-321P, Instruction Manual, Page: 6 / 16

Memory Function
Up to 31 weight data can be stored in memory. The 32nd data is stored by
deleting the oldest stored data. The difference from the previous result is
displayed automatically.
Storing a Current Weight.
1
Set the slide switch to “MEMORY”.
2
Press the measurement switch gently.
The last weight is displayed.
3
Step on your scale.
When 0.00 kg and the mark are
displayed, step on your scale gently. The
measurement is started when the mark
disappears. Remain still during the
measurement.
If 0.00 kg is displayed for approximately
ten seconds, the scale is automatically
turned off.
4
The weight can be read after the
mark is displayed.
5
Step off the scale.
6
The weight is stored in memory
and the difference from the last
weight is displayed.
The weight data is stored in memory
and the difference from the previous
result is displayed for approximately
five seconds. And the scale is auto-
matically turned off.
- 6 -