A&D UA-782, Instruction Manual

Page: 13 / 20

11
About Memory
The device automatically stores up to ninety blood pressure and pulse
measurements in memory. Data stored in memory are assigned a data
number in the order of the newest to the oldest. The oldest data displays
as "n01". The M symbol in the lower left corner of the display indicates
that you are viewing previous data stored in memory.
Recalling Data
1. When nothing is displayed, press the MEMORY
button.
The data number of the most recent measurement
and the data are displayed.
2. If you want to see the previous data, press the
MEMORY button until getting the data you want.
3. The display will shut off automatically one minute after
you press the MEMORY button.
Note: If press the START button when recalling data,
the display shuts off.
Clearing Data
To clear all data stored in memory:
Press and hold the MEMORY button until the
“ M ”(memory) mark blinks three times.
Remove the batteries and press the START or
the MEMORY button.
Re-install them again.
If there is no stored data in the memory, "--" will appear.
Press
Press and hold