6
2. INTRODUCTION
This manual describes how the SW Series Super Washdown Scales work and how to
get the most out of them in terms of performance. Please read this manual completely
before using the scale.
3. FEATURES
The SW Series Super Washdown Scales have the following features:
Dust-tight and water-tight construction, complying with IP69K.
The weighing platforms and weighing pans are made of stainless steel (SUS304).
The weighing platforms are designed for easy cleaning
and not to collect dust
.
Three sizes of weighing platform are available.
Employing touch-sensitive keys enabled the display to be covered with a plastic
sheet, resulting in better dust-tight and water-tight performance.
When a key is touched, the corresponding LED, above that key, turns on to indicate
that the key has been touched.
A bright LED display, with a broad viewing angle.
Three types of weight display resolution are available to cover various applications,
1/3,000, 1/6,000 (1/7,500 for some models) and 1/12,000 (or 1/15,000 for some
models). (To be selected in the function setting.)
Note: The weight display resolution of the Legal for Trade models is fixed. The
selection in the function setting is not available.
The counting mode easily counts the number of objects of the same weight.
The comparator mode compares the displayed value (weight value) with the
previously set comparator values and indicates the results by the large and bright
LED display. The optional comparator relay output (SW-03) can output the results
as a relay signal.
The auto-tare function, used with the comparator mode, automatically tares and
displays “OK” for a certain amount of sample and repeats this process for the next
weighing.
Available weighing units are kg (kilogram), g (gram), Ib (pound), oz (ounce), Ib-oz
(pound and ounce) and pcs (pieces for the counting mode).
The optional RS-232C serial interface (SW-03) or optional RS-422/485 serial
interface (SW-04) can transmit the weight value to a printer or personal computer.
The optional sealed lead acid (SLA) battery (HC-02i) can be installed, allowing the
scale to be used where an AC power source is not available.
