11
6.2. Keys
The keys are touch-sensitive. Three levels of key sensitivity are available and can be
set in the function setting “
key
“. When set to “
key 2
“ (High), the keys can be
operated with a gloved finger.
About touch-sensitive keys
This product uses touch-sensitive keys to improve operability and
waterproofness and reduce failures. However, if water, the substance being
weighted, etc. adheres to the key part, that may adversely affect key operation.
Wipe of any such substance adhering to switches with a cloth.
Key
Description
ON/OFF key
Turns the power ON or OFF.
When turned ON, the scale will be automatically set to zero (power-on zero).
To turn the power OFF, press and hold the key.
Note: If pressing the key does not turn the power ON immediately, keep
pressing the key.
SAMPLE key
In the counting mode (“pcs”), goes to the unit weight storing mode.
Press and hold to go to the comparator value setting mode.
PRINT key
Outputs the weight value to the printer.
In the setting mode, this key is used to increase the value of the selected
blinking digit by one.
UNITS key
Switches the weighing unit.
In the setting mode, this key is used to shift the blinking digit to the right.
ZERO key
Zeroes the scale and sets the display to zero. (See below.)
TARE key
Subtracts the tare (container) weight placed on the weighing pan. (See below.)
In the setting mode, this key is used to store the setting value and proceed to
the next step.
The ZERO key will zero the scale if the weight value is within ±2% of the
weighing capacity (kg) around the power-on zero point. The ZERO
indicator
turns on. (ZERO operation)
The ZERO key functions while the weight value is stable.
Even with “
-e
” displayed, when the STABLE indicator turns on, pressing the
ZERO key will zero the scale.
The TARE key will tare the scale and subtract the weight to zero as a tare weight
when the weight is a positive stable value. In this case the ZERO
and NET
indicators turn on. (TARE operation)
When the tare is removed while the tare operation is in progress and the scale
returns to the zero point, the ZERO
and NET
indicators turn on. In this case
the displayed tare value will be negative.
(
Note: In some countries or areas,
the ZERO indicator will not turn on
during the TARE operation.)
