![background image](http://html1.mh-extra.com/html/aandd/ra3100-omniace/ra3100-omniace_simple-instruction-manual_446281023.webp)
2.Pre-Measurement Procedures - 2.1.Before Switching On the Power
1WMPD4004445
23
2.1.3. Paper Loading
The procedure for loading recording paper to the printer block is indicated below.
Load the recording paper to this product. There are two types of recording paper: paper rolls and Z-fold
paper.
For information on loading Z-fold paper, see the "RA3100 Instruction Manual".
Raise the lever to open the printer cover.
Lever
Recording paper outlet
Printer cover
Z-fold paper inlet
Paper Loading Procedure
Step 1. Attach the paper holders to the paper roll.
Attach a paper holder to both ends of the paper roll. When loading a partially used roll, trim the
edges for ease of loading, as shown in the figure.
The inside of the roll paper is the back side and the outside is the thermal surface that is printed on.
Step 2. Open the printer cover by raising the lever of the printer block.
Pull the lever upwards.
Recording paper guide (the U-shaped groove)
Platen roller (black roller)
Recording paper outlet