![background image](http://html1.mh-extra.com/html/aandd/ra3100-omniace/ra3100-omniace_instruction-manual_3072739033.webp)
2.Pre-Measurement Procedures - 2.2.Turning the Power On/Off
1WMPD4004444
33
Step 3. Connect the plug of the AC power cable to the power outlet.
Power outlet with ground terminal
Inlet side
to AC socket
Plug to
power outlet
AC power cable
Step 4. Turn the power switch of the product on.
When the Power switch on the operation panel of the
product is turned on, the green LED lights up and the power
turns on.
NOTE
Standby current flows to this product when the AC power
cable is connected to the power outlet.
Remove the power cable when the product will not be used
for an extended period of time.
Power switch
2.2.3. Confirming Normal Startup
The monitor screen of the RA3100 is displayed about one minute
after turning the power on.
NOTE
Do not touch the touch panel until the waveform monitor is
displayed. Doing so may lead to erroneous operations.
Immediately after purchase or initializing the main unit,
measurement is turned off for all channels and no waveform is
displayed.
Summary of Contents for RA3100 Omniace
Page 1: ...RA3100 Omniace Instruction Manual 1WMPD4004444...
Page 173: ...13 Optional Parts 13 2 List of Probes Clamp Meters 1WMPD4004444 173 MEMO...
Page 174: ...13 Optional Parts 13 4 List of Spare Parts 174 1WMPD4004444 MEMO...
Page 175: ...Omniace RA3100 Instruction Manual 1WMPD4004444 1st Edition...