A&D HV-G Series, Instruction Manual

Page: 30 / 69

HV-G Instruction Manual Page 29
11.1 Preparation (Setting Parameters)
Step 1 Turn off the display.
Press the
ON/OFF
switch while the
ZERO
switch is
pressed and held. The function table is displayed.
Step 2 Press the
ENTER
switch to display an item of the
accumulation function (
f6
).
Step 3 Select a parameter of the comparator function
(
f6 0
~
f6 7
) with the
^
switch.
Step 4 Press the
ENTER
switch to store the new parameter.
Step 5 Press the
F
switch and the
ENTER
switch to exit from
the function table. Then the scale displays the
weighing mode.