- 11 -
Command M L
,
0 1
,
+ 0 0 1 0 0 0
,
+ 0 0 0 2 0 0
,
+ 0 0 0 1 0 0 C L
F
Reply
M L
,
0 1
,
+ 0 0 1 0 0 0
,
+ 0 0 0 2 0 0
,
+ 0 0 0 1 0 0 C L
F
FS-15K
i
: Store target weight 1.000 kg, upper limit 0.200 kg and lower limit
0.100 kg into the memory number “01”.
F07-2 is set, the command should have 2 digit memory number, target weight that
has a polarity and 6 digit number without decimal point, and HI/LO limit % that has
“+” and 5 digit number without decimal point.
Command M L
,
0 1
,
+ 0 0 1 0 0 0
,
+ 0 0 0 2 0
,
+ 0 0 0 1 0 C L
F
Reply M
L
,
0 1
,
+ 0 0 1 0 0 0
,
+ 0 0 0 2 0
,
+ 0 0 0 1 0 C L
F
FS-15K
i
: Store target weight 1.000 kg, upper limit +0.2 % and lower limit +0.1 %
into the memory number “01”.
Clear the contents of specified memory number. (No reply for F20-1.)
Command C
M
,
0 1 C L
F
Clear the contents of memory number “01”.
Reply C
M
,
0 1 C L
F
Reply in case of the function setting F20-0
There are other replies to the commands other than examples above, when the
function setting F20-0 is selected.
The scale is not in a state where a command could be executed. Then, the scale
will reply “I”.
Command Z
C L
F
Reply I
C L
F
The scale is not within the zero range or unstable.
Command does not exist for the scale. Then, the scale will reply “?”.
Command B
C L
F
Undefined command for the scale.
Reply ?
C L
F
When the function setting F20-1 is selected, there is no reply to those commands.
2-4. Using UFC (Universal Flex Coms) function
The UFC function allows you to format the print out (UFC format).
The scale can store the UFC format as text data. It will include parameters to
replace with the weight data, tare data and so on.
