A&D EK-i Series, Instruction Manual

Page: 37 / 47

35
dampened with a mild detergent.
12-2. Error codes
Overload error
Warning to indicate that an object beyond the balance
capacity has been placed on the pan. Remove the object
from the pan.
Range over notice
This will be shown by the EW-
i
series when a weight
beyond the range capacity is tared and removed from the
pan. Press the SAMPLE key to change the weighing
range or press the RE-ZERO key.
Unit weight error
The sample weight is too light to set the unit weight in the
counting mode.
Sample quantity notice
When sample weight is light and the counting error could
become large, the balance will request yo u to use larger
number of samples. Place the displayed number of
samples on the pan and press the PRINT key to store
the unit weight.
Note: Pressing the PRINT key without adding
samples may reduce counting accuracy.
Starting from the 100 samples,
100 100 --
may
be displayed when the sample weight is light.
This is for your notice and press the PRINT
key without adding any samples.
When “
aCai 0 aCai 0
” (ACAI disabled) or “
Umi n 2 Umi n 2
” is
set, this notice is not shown.
CAL errors
Warning to indicate that calibration has been canceled
because the calibration weight is too heavy.
Warning to indicate that calibration has been canceled
because the calibration weight is too light.
Check the weighing pan and the calibration weight.
To return to the weighing mode, press the MODE key.
Low battery
Warning to show that the battery pack (OP-09) is
discharged. Immediately stop using it, and recharge or
use the AC adapter.
Stability error
Warning to indicate that the weight value is not stable
and the balance cannot display it. Prevent vibration and
e
- e
l o
Cal e
- Cal e
l b0
er r or 1
100 -
25 -
10 -
50 -