ADF-3200 Installation and Operation Guide
Date : July. 1st. 2013
- 20 -
7. OTHERS
7-1 LED SIGNALS
Red LED : The system is powered but not synchronized
Green LED : signal of 3D synchronization (greater than 76Frame)
7-2 GUARANTEE
The bestView ADF-3200 is guaranteed to the original purchaser for 24
months according to Korean legislation. 3D-filter and cables should be
returned in their original package along with the original proof of purchase.
3D-filter that are broken or scratched are not covered.
The bestView may become damaged if it is placed in front of the projector
lens such that the image from the projector does nor cover as mush as
possible the entire area of the polarization panel (see 3-3 INSTALLATION).
Damage caused by placing the 3D-filter of bestView too close to the
projector lens is not covered by guarantee.
A&D 3D will guarantee that faulty product will be made an exchange to
new one with respect to use in working order within the term of warranty.
If operating errors occur abnormally, please don’t disassemble and repair
ADF-3200 system. We will replace your product as the same new one
within the term of warranty. If it would be post warranty, please send us
the product as your convenient method. We will repair it and return to you.
7-3 IMPORTANT SAFETY RECOMMENDATIONS
In case of damage to the bestView ADF-3200 where the skin is exposed
to liquid crystal material, we recommend that you immediately wash the
area with soap and water. In case of eye exposure to liquid crystal material,
please seek medical advice immediately.
7-4 MAINTENANCE OF THE
ADF-3200
- Protect all parts of the bestView system from direct sunlight, heat or water.
Extreme conditions may alter the product’s performance.
- Do not modify the electrical or mechanical components of bestView system.
There is no user accessible part inside the bestView ADF-3200.
- Do not apply force to the panel of 3D-filter.
- Avoid all vibration and shock.
