157
Bluetooth
Display settings: MENU key
System settings button
Communication button
Bluetooth button
[Bluetooth] screen
1
Bluetooth mode
2
Connection status
3
Bluetooth data format
4
Back button
Name
Setting value (setting range)
Description
1
Bluetooth mode
Bluetooth keyboard mode, Bluetooth
serial mode
You can change the communication
mode.
2
Connection status
-
The connection status is displayed.
3
Data
format
A&D standard format , DP format,
KF format,
MT format,
NU format,
NU2 format,
CSV format
UFC format
You can select the data format.
(This applies when the Bluetooth mode
is set to [Bluetooth serial mode].)
4
Back button
-
Returns to the previous screen.
Settings in the red box are default values (factory settings).
Caution on Bluetooth
In the Bluetooth keyboard mode,
use a Bluetooth enabled device (such as a personal computer or smartphone) to perform a paring.
In the Bluetooth keyboard mode, the communication is one way from the balance to the Bluetooth
enabled device.
Only numerical values that represent weighing values are output.
In the Bluetooth serial mode,
you can use the personal computer connection dongle AD8541-PC to enable two-way communication
where commands are sent from your personal computer.
This connection allows WinCT, etc. to communicate.
For details on the data format, refer to “
Bluetooth® communication capability is disabled for regions where the balance is not certified as being
compliant with local laws regarding use of Bluetooth® communication.
Summary of Contents for BA-T Series
