A&D AD-1641, Instruction Manual

Page: 14 / 28

12
＞
INTERVAL TIME
1min
PRIMARY DATA
T1 / %RH
CLEAR
FUNCTION
USB
7 Management of Items
Setting screen
Step 1 Display the menu.
SELECT key Press this key several times to display the menu.
Step 2 Enter to an item of the menu.
▲
UP
,
▼
DOWN key Selects an item.
ENTER key Enters into the item.
Step 3 Specify a parameter for the current item.
▲
UP
,
▼
DOWN key Changes the parameter.
ENTER key Stores new parameter and proceeds to next item.
ON / OFF key Cancels and proceeds to next item or menu.
Step 4 Operations after finishing the management.
SELECT key Proceeds to the intended display
Note
■
Selectable items will change depending on operating conditions.
7.1 INTERVAL TIME
Specify the time interval with the interval measurement.
This is the same as item "INTERVAL TIME" of the "7.4.FUNCTION".
7.2 PRIMARY DATA
Specify two items to display from the air flow, temperature, relative humidity,
barometric pressure, vibration and weighing data with "PRIMARY DATA"
display or "trend graph" display.
Refer to item "PRIMARY DATA" of the "7.4.FUNCTION".
Time of interval
mode
Selection of
monitored
data
Item to delete
data
Item of
parameter list
USB function
selection