-5-
-6-
-7-
-8-
＜
Bypassing the RS-232C output of the FG series
＞
- When the RS-232C is bypassed, power for the AD-1612 itself is not
needed..
** RS-232C communication terminal assignment table **
7. How to Use
1) Wire to the terminal block.
→
Refer to ”6. How to Connect”.
2) Connect the device to the power using the AC adapter.
→
Pilot lamp is on.
3) Set the comparator brightness and buzzer.
(only at initial use and setting change)
→
Refer to ”9. Function Settings”.
4) Turn on the power for external devices connected to the
AD-1612.
5)
Each comparator light lights up and the buzzer sounds
according to the contact outputs.
Priority of buzzer sound when at least 2 LEDs simultaneously light up
HI 2 > LO 2 > HI 1 > LO 1 > OK
8. Internal Configuration
Five sets of the following configurations
are included in the device.
Balance / scale
AD-1612
Comparator input
Contact input (Relay/Switch/Photocopular)
COM
Common terminal (6th pin of terminal block)
ON
1V or less (1mA at short circuit)
OFF
2.5V or more
9. Function Settings
9-1. How to set
1. In normal mode,
press and hold the [SET] key.
Pilot lamp: on (normal mode)
→
off (setting mode)
2. All LEDs are on.
3. Press the [SELECT] key several
times to select the LED brightness.
(Refer to “9-2 Function List”.)
4. Press the [SET] key to confirm.
5. The HI-2 LED is on and the buzzer
sounds with the HI-2 setting sound.
(Factory settings are set to no sound.)
6.
Press the [SELECT] key several
times to select the buzzer sound.
(Refer to “9-2 Function List”.)
7. Press the [SET] key to confirm.
8.
The HI-1 LED is on and the buzzer
sounds with the HI-1 setting sound.
9. Repeat Steps 6 and 7 four times until
LO-2 is set.
10. Return to Step 2 after finishing the LO-2
setting.
11. Press and hold the [SET] key after the settings
for all items are finished to return to normal
mode.
Pilot lamp: off (setting mode)
→
on (normal mode)
Note 1 By pressing and holding the [SET] key even before settings
are completed for all items, the device returns to normal
mode after memorizing the settings for items that have
been configured.
Note 2 Settings are maintained in non-volatile memory even when
the power is turned to off.
Note 3 In setting mode, the device does not perform comparator
operations. Return the device to normal mode to use
comparator mode after setting is complete.
9-2. Function list
10. Trouble Shooting
Note If the remedies above do not resolve the problem or if other
problems occur, contact your local A&D dealer.
11. Specifications
11-1. General
Model name
AD-1612
Power supply
AC adapter
(DC7.5V to 15V / 500mA)
Operating
temperature range
-10
℃
to 40
℃
(no condensation)
Display
LED: HI-2 (red)/HI-1 (yellow) /OK (green)/
LO-1 (yellow)/LO-2 (red)
Buzzer sound level
Up to approx. 95 [dB]
Power consumption
Approx. 2.1 VA (when LEDs are lit and
buzzer sound is at maximum)
Dimensions
(W
×
D
×
H)
147 x 80 x 115 [mm]
Mass
(including the stand)
Approx. 700 [g]
Accessories
DC cable, rubber feet and instruction
manual
Connectible devices
Balances or scales made by A&D that
are equipped with a comparator option
(Refer to the A&D website for details)
Connector shape
RS-232C
：
D-sub 9 pin, male
A&D HP
http://www.aandd.jp/products/weighing/wproduct.html#peripherals
11-2. Options sold separately
Pole mounting bracket
AD1612-14
Communication cable
AX-KO507-S200
DIN 7 – discrete wire, 2m
AX-KO5862-S200
DIN 8 – discrete wire, 2m
AX-KO5862-N200
Discrete wire - Discrete wire, 2m
AC adapter:
AX-TB280
C/BF plug, 9V, 500mA
AX-TB275
A plug, 9V, 500mA
Note When supplying power to balance / scale, use the AC
adapters supplied with them.
3-23-14 Higashi-Ikebukuro, Toshima-ku, Tokyo 170-0013, JAPAN
Telephone: [81] (3) 5391-6132
Fax: [81] (3) 5391-6148
http://www.aandd.jp/
A&D ENGINEERING, INC.
1756 Automation Parkway, San Jose, California 95131, U.S.A.
Telephone: [1] (408) 263-5333
Fax: [1] (408) 263-0119
http://www.andonline.com/
A&D INSTRUMENTS LIMITED
Unit 24/26 Blacklands Way, Abingdon Business Park, Abingdon, Oxfordshire OX14 1DY,
United Kingdom
Telephone: [44] (1235) 550420
Fax: [44] (1235) 550485 http://www.aandd-eu.net/
A&D AUSTRALASIA PTY LTD
32 Dew Street, Thebarton, South Australia 5031, Australia
Telephone: [61] (8) 8301-8100
Fax: [61] (8) 8352-7409
http://www.andaustralasia.com.au/
A&D KOREA Limited
Manhattan Building 8
th
Floor, 36-2 Yoido-dong, Youngdeungpo-gu, Seoul,
150-749 Korea
Telephone: [82] (2) 780-4101
Fax: [82] (2) 782-4280 http://www.andk.co.kr/
OOO A&D RUS
Business-Center “Vereyskaya Plaza-2” 121357, Russian Federation, Moscow,
Vereyskaya Street 17
Telephone: [7] (495) 937-33-44
Fax: [7] (495) 937-55-66 http://www.aandd.ru/
A&D INSTRUMENTS INDIA PRIVATE LIMITED
509, Udyog Vihar, Phase-V, Gurgaon - 122016, Haryana, India
Telephone: [91] (124) 4715555
Fax: [91] (124) 4715599 http://www.aanddindia.in/
FG (AX-KO507)
AD-1612
DIN 8 connector
Discrete wire
Terminals D-sub
9
connector
Pin
No.
Description Cable
color
Pin
No.
Description
Pin
No.
Description
7 DSR Blue 7 DSR 6 DSR
2 RXD White 8
TXD
(receive data)
3 TXD
3 TXD Red 9
RXD
(transmit data)
2 RXD
5 SG Yellow
10 SG
5 SG
Step Items Parameters
Descriptions
0 Off
1 Dark
2
3
◆
4
3
Comparator light
brightness
5 Bright
0
◆
No
sound
1
Repeating short beep
2
Two repeating short beeps
3
Three
repeating
short
beeps
4
Rapid
short
beeps
6
Buzzer sound for the
comparator output
5
Long
beep
Error Possible
causes
Remedies
When the power cannot be provided
Use a proper AC adapter after
confirming output rating of the
AC adapter.
The proper AC
adapter is not
used.
Refer to the A&D website for a
proper AC adapter made by
A&D.
Poor AC adapter
connection
Fully insert the AC adapter.
When the device is not in normal mode
1
The pilot lamp
does not light
up even when
the device is
connected to
the power
using the AC
adapter.
The device is in
setting mode.
Press and hold the [SET] key to
return to normal mode.
Poor connection
Firmly reconnect the signal
wires to the terminals after
confirming the terminals.
The device is not
receiving a signal.
Confirm the comparator output of
the balance or scale.
2
The comparator
light cannot
properly be
functioned.
The connection
port is not correct.
Confirm the connection of the
port.
The proper AC
adapter is not
used.
Use a proper AC adapter after
confirming output rating of the
AC adapter.
3
Buzzer sound
fluctuates.
The front of the
speaker is
blocked.
Keep the device clean after
confirming there is nothing
covering the holes on the rear
side of the device.
Confirm the RS-232C
connector again.
→
Refer to “6. How to Connect”.
4
Bypass for the
RS-232C
cannot
properly be
functioned.
Connection error
Firmly reconnect the signal
wires to the terminals after
confirming the terminals.
Press and
hold
LED
bright-
ness
HI-2
HI 1
-
buzzer
OK
LO-1
LO-2
[SET]
[SET]
[SET]
[SET]
[SET]
[SET]
buzzer
buzzer
buzzer
buzzer
External indicator
Printer
D-sub 9 pin
(AX-KO2466)
RS-232C cable
RXD
GND
TXD
DSR
No
connec-
tion
(inside of the OP-23)
RS-232C communication (OP-23)
DIN 8 pin (available for 7 pin)
(AX-KO507-S200)
Treminal block (7 to 10)
LO OK HI
M IN MAX
A D-1612
FG
AD-1612
*
D-sub 9 pin
HI/OK/LO
Photocoupler
COM
Or
COM
Input
(terminal
block)
Micro
computer
LED
Buzzer
Output
5V
relay
switch
Contact
output
LO OK HI
LO OK HI
LO OK HI
HI-1 on
HI-2 on
Confirm brightness
→
Go to next item settings
All LED on
Press and
hold
Press the key
to switch.
Confirm HI-2 sound
→
Go to next item settings
Press the key
to switch.
