AAMP Global Stinger TXFBB12, Installation Manual

Page: 3 / 12

3
INSTALLATION
NOTES

For models equipped with a factory subwoofer, unplugging the factory subwoofer is recommended.

Some installation steps are more easily completed with a second person.

Speaker wire is required before the enclosure is mounted.

Recommended amplifier rating: 400-800 watts @ 2ohms.

Do not power up until inside contents are removed.
GETTING
STARTED
Remove the four Philips screws from the speaker and remove the speaker.
Set speaker and screws in a safe place.
Remove contents from inside the enclosure.
Open the hardware pack and confirm hardware quantities and tools required using the guide on the
following pages.
RECOMMENDED
TOOLS
#2 Philips Screwdriver
5mm Allen Wrench
14mm Wrench
10mm Socket
Ratchet
Socket Extension
9mm Drill Bit (Included)
Drill
Center Punch
Hammer
Tape
Wire Strippers
Scissors
Rivet Nut Setter (Optional)