Aalborg XFM Series, Operating Manual

Page: 16 / 56

13
5.3 XFM Parameters Settings
5.3.1 Engineering Units Settings
The XFM Mass Flow Meter is capable of displaying flow rate with 23 different
Engineering Units. Digital interface commands (see paragraph 8.3 ASCII
Command Set “XFM SOFTWARE INTERFACE COMMANDS”) are provided to:
- get currently active Engineering Units
- set desired Engineering Units.
The following Engineering Units are available:
TABLE VI UNITS OF MEASUREMENT
NUMBER INDEX
FLOW RATE
ENGINEERING
UNITS
TOTALIZER
ENGINEERING
UNITS
DESCRIPTION
1 0 % %s Percent of full scale
2 1 mL/sec mL Milliliter per second
3 2 mL/min mL Milliliter per minute
4 3 mL/hr mL Milliliter per hour
5 4 L/sec Ltr Liter per second
6 5 L/ min Ltr Liter per minute
7 6 L/hr Ltr Liter per hour
8 7
m
3
/sec m
3
Cubic meter per second
9 8
m
3
/ min m
3
Cubic meter per minute
10 9
m
3
/hr m
3
Cubic meter per hour
11 10
f
3
/sec f
3
Cubic feet per second
12 11
f
3
/min f
3
Cubic feet per minute
13 12
f
3
/hr f
3
Cubic feet per hour
14 13 g/sec g Grams per second
15 14 g/min g Grams per minute
16 15 g/hr g Grams per hour
17 16 kg/sec kg Kilograms per second
18 17 kg/min kg Kilograms per minute
19 18 kg/hr kg Kilograms per hour
20 19 Lb/sec Lb Pounds per second
21 20 Lb/min Lb Pounds per minute
22 21 Lb/hr Lb Pounds per hour
23 22 User UD User defined