9
6. WIRELESS CONTROL – PAIRING
CURRENTLY: ONE AERO-‐ONE PEDAL COMMUNICATION ONLY!
ONE AERO – MULTIPLE PEDALS READY AFTER SUMMER 2015
In order to control your Aalberg effects pedal using the AERO wireless controller
(optional) you need to pair the devices.
Below is a step-‐by-‐step guide:
2.
Set your devices in pairing mode:
•
AERO
:
i.
Turn off the AERO (slide switch set to ‘0’)
ii.
Press and hold rotary knob button and left button* simultaneously, then
turn the AERO on (slide switch set to ‘I’)
iii.
The AERO LED starts blinking (red) to indicate that the AERO is in pairing
mode
•
Aalberg effect pedal:
i.
Unplug power jack
ii.
Press and hold FX-‐SELECT then plug in power jack
iii.
Lowermost LED in mid row starts blinking to indicate that the pedal is in
pairing mode
*
