2.
Product Specifications
Product Name
Cold/Ambient Bottled Water Cooler
Product Code
WCBC60
Product Name
AquaPoint60
External Dimensions (W x D x H)
326 x 353 x 1032
Weight
Abt. 15Kg
Compressor
1/13 ~ 1/17HP Sealed Type
Condenser Type
Wire Type
Motor Power Consumption
90W
Refrigerant
R-134a
Cold Water Tank
STS304, 1.9Liters (Cold water only)
Cold water Capacity
20 Cups at 12
℃ Under
Temperature Control
Thermostat (in Cold)
Cooling Type
Forced Cooling Type
Regulated Power
AC 220~240V/50~60HZ.1
Power Cord Length
1.8M
Front Panel
ABS
Side Panel
EGI
Faucet
PP Assembly
3. Safe Installation
Precautions during Installation
Use power cable of proper capacity.
The plug should be rated for more than 12A
Sharing a socket with other electrical products
will overheat the outlet and may cause fire.
Place Cooler on a hard, level surface.
Avoid placing the Cooler near a source of heat
or steam, such as a gas range or oil stove, or
near sink or other place where water may be
splashed onto the Cooler.
Maintain at least 15cm distance between wall
and back of the Cooler to allow for a good air
flow.
Transport & Installation
·
Do not tilt the Cooler more than 45 degrees while moving it.
·
Do not connect the Cooler to power for at least one hour after moving it.
·
Always fill with water first, before switching power ON to avoid damaging the Cooler.
