SAAF
™
PORTA-Scrubber
Installation, Operation, and Maintenance Instructions
1.0 Introduction
1.1 About This Document
This document contains the information necessary to properly
receive, assemble, install, operate, and maintain the SAAF
TM
PORTA-Scrubber filtration system. The purchaser, installer, and/or
operator of the filtration system MUST read and comply with this
document in its entirety prior to installation of the equipment and its
operation. Failure to comply with the requirements of this manual
may void the product warranty.
CAUTION: These instructions are specific to the SAAF PORTA-
Scrubber and SAAF Chemical Filtration Media. All ancillary tasks
including, but not limited to, electrical and mechanical work,
equipment handling, and safety procedures must be performed in
accordance with industry accepted practice and all relevant local,
state, and federal government codes, laws, and policies.
Better Air is Our Business
®
Table of Contents
1.0 Introduction
1.1 About this document
1.2 Packaging and shipping, receiving and inspection,
handling and storage
1.3 Product descriptions
1.4 Product model designations
1.5 Product drawings
1.6 Assembly – general comments
1.7 Related system equipment
2.0 Principles of Operation
3.0 Installation Instructions
3.1 Space requirements
3.2 Foundations and anchoring
3.3 Typical PORTA-Scrubber details
3.4 General filter system installation
3.5 Preparation for filter installation
3.6 PolyKlean
TM
Blue filter installation
3.7 Gas phase chemical media installation
3.8 Cover latches
3.9 Fans
3.10 Standard Motors
4.0 Start-up Instructions
5.0 Maintenance
5.1 PolyKlean Blue filter
5.2 Gas phase chemical media monitoring
5.3 Removal and replacement of particulate and gas phase
chemical media
5.4 Disposal of used filters
5.5 Cover sealing gaskets
5.6 General system maintenance
6.0 Troubleshooting
7.0 Spare Parts List
8.0 Equipment Characteristics, Operating Weights, and
Shipping Weights
