manualshive.com logo in svg

AAF Flanders AstroHood S-I, Installation, Operation And Maintenance Manual

Share
Download
AAF Flanders AstroHood S-I Installation, Operation And Maintenance Manual Download Page 2

1

TABLE OF CONTENTS:

Introduction and Precautions ................................................................................................. 02

Equipment Overview  .............................................................................................................. 03

Unpacking  ............................................................................................................................... 03

Ducted Terminal Hood Installation ......................................................................................... 04

Mounting Options  ................................................................................................................... 05

Clean Ceiling Angles for AES Clean Ceiling  .......................................................................... 05

Flange (Permanent Trim) for Grid/T-Bar Ceiling  ....................................................................06

Field-Installed Trim for Hard/Gypsum Ceilings ................................................................ 06-07

PermaFrame  ..........................................................................................................................  08

Grille Installation and Removal ..........................................................................................09-10

Filter Unpacking, Installation, Storage, and Operation  .....................................................11-12

Aerosol Injection and Static Pressure/Upstream Aerosol Ports  ..................................... 12-13

Damper Options and Operation ........................................................................................ 14-15

Insulation Options  ................................................................................................................... 15

Appendix A – Warranty Information ......................................................................................  16

Appendix B – Manual Revision History .................................................................................  17

Contacting AAF Flanders .........................................................................................Back Cover

Summary of Contents for Flanders AstroHood S-I




















Reviews:

No comments

Brands by name

Popular brands

Load more brands