background image

8

Butterfly Damper

 for wider adjustment of airflow 

from roomside. This option includes a fixed 
distribution plate and swagged inlet. Dampers in 
the HVAC system are recommended.

Fixed Distribution Plate

 for applications where 

no adjustment of the airflow is required from the 
roomside and all are in the HVAC system.

Adjustable Distribution Plate

 for fine tuning 

the airflow from roomside. Dampers in the HVAC 
system are recommended.

Fig: 06 Dampers and Operation

Insulation Options

Insulation options are available to prevent heat loss, mitigate potential condensation, and/or provide 
sound attenuation. Determining the use of these options is the responsibility of the design engineer.

 The 2" foil-backed option is an aluminum foil-backed fiberglass (installed 6.0 R-value) attached to 
the housing using adhesive-mounted insulation anchors and caps.

Dampers and Damper Operation 

The AstroHood S-lll RSR Ducted HEPA Terminal Hood is supplied with Split Butterfly, Telescoping 
Disc, or no damper (i.e., fixed distribution disc).
The Split Butterfly and Telescoping disc dampers are adjustable from the room side via Phillips head 
screwdriver. Please note that a filter with centerboard and access port must be supplied to access 
the damper adjustment.

Summary of Contents for AstroHood S-lll RSR













Reviews: