Aaeon SBC-780, User Manual

Page: 49 / 84

F u l l - S i z e C P U C a r d S B C - 7 8 0
Chapter3 Award BIOS Setup 3 - 11
²
Boot Other Device
If your boot device, such as SCSI/RAID, is not included in
the following choices “Floppy, LS120, HDD, SCSI, CDROM,
ZIP100, USB-FDD, USB-ZIP, USB-CDROM, USB-HDD,
LAN, ISA-FDD”, you may set First/Second/Third Boot
devices to "Disabled" and enable the BOOT Other Device
function. The system will automatically boot the other device.
The choices: Enabled, Disabled.
²
Swap Floppy Drive
This field is effective only in systems with two floppy drives.
Selecting enabled assigns physical drive B to logical drive A,
and vice-versa.
The choices: Enabled, Disabled.
²
Boot Up Floppy Seek
When Enabled, the BIOS tests (seeks) floppy drives to
determine whether they have 40 or 80 tracks. Only 360-KB
floppy drives have 40 tracks; drives with 720 KB, 1.2 MB, and
1.44 MB capacity all have 80 tracks. Because very few modern
PCs have 40-track floppy drives, we recommend you to
choose "Disabled" to save time.
The choices: Enabled, Disabled.
²
Boot Up NumLock Status
Toggle between On or Off to control the state of the
NumLock key when the system boots. When toggled On, the
numeric keypad generates numbers instead of controlling
cursor operations.
The choices: On, Off.