SBC-776 Installation Guide 17
SBC - 776
Quick Installation Guide
LCD or VGA Enable Header (JP10)
* Default VGA
Dual Display
1 3 5
1 3 5
2 4 6
2 4 6
VGA/LCD Enable
LCD 2PIXS/CLK
VGA Enable
LCD 1PIXS/CLK
VGA connector (CN6)
The mainboard's PCI SVGA interface can drive conventional CRT
displays and is capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive
LCD, and active LCD displays. The board has two connectors to
support these displays, one for standard CRT VGA monitors and
one for flat panel displays.
VGA display connector (CN6)
CN6 is a 15-pin, dual-in-line header used for conventional CRT
displays. A simple one-to-one adapter can be used to match CN6 to
a standard 15-pin D-SUB connector commonly used for VGA.
VGA display connector (CN6)
Pin Signal
Pin
Signal
1
RED
9
VCC
2
GREEN
10
GND
3
BLUE
11
N/C
4
N/C
12
DDDA
5
GND
13
H-SYNC
6
GND
14
V-SYNC
7
GND
15
DDCK
8
GND
16
N/C
