![background image](http://html1.mh-extra.com/html/aaeon/sbc-670s/sbc-670s_manual_3358769066.webp)
Chapter 5 SCSI Driver Installation
59
Windows NT v3.5x Driver Installation
Follow these instructions only if Windows NT v3.5x is already
installed.
1. Select and start the Windows NT Setup program. (Its icon is
usually found in the Main program group.) There is a brief
pause while Windows NT Setup scans your hardware configu-
ration.
2. Select the Options pull-down menu and then select Add/
Remove SCSI adapters. The SCSI adapter setup program
displays a list of all host adapters currently installed.
3. Click the Add button to add another host adapter type to the
list. A list of additional SCSI adapters appears.
4. Expand the list of additional SCSI adapters; select Other and
press ENTER. (Requires disk provided by the hardware
manufacturer).
5. Insert the Adaptec 7800 Family Manager Set v2.0 diskette for
Windows NT into drive A; enter the following path to the
installation files and then click OK.
a:\winnt\3_5
6. The screen displays the adapter drivers supported on the
diskette. The "Adaptec AHA-29x/AHA-394x/AHA-4944 or
AIC-78xx PCI SCSI Controller (NT 3.5x)" driver is highlight-
ed by default, Click OK. The driver is added to the list of
SCSI adapters.
7. Select "Adaptec AHA-294x/AHA-394x/AHA-4944 or AIC-
78xx PCI SCSI Controller (NT 3.5x)" from the list of SCSI
adapters and click Install.
At this point, Windows NT setup checks to see if the specified
driver (in this example, aic78xx.sys) has already been copied
to the system disk.
Summary of Contents for SBC-670S
