Aaeon SBC-659P, User Manual

Page: 23 / 100

Chapter2 Installation 13
Installing SODIMM
Supplementary information about DIMM
Your SBC-659P can accept both regular and PC-100/133 SDRAM
DIMM Module. Onboard one 144-pin SODIMM socket supports
up to 256MB of memory.
Single-sided modules are typically 16 or 128MB; double-sided
modules are usually 32 or 256 MB.
Memory Installation Procedures
To install SODIMM, first make sure you are holding the SODIMM
memory module at a 45 degree angle. Slowly slide the SODIMM
module along the plastic guides on both ends of the socket. Then
press the module right down into the socket, until you hear a click.
This is when the two handles have automatically locked the
memory module into the correct position of the SODIMM socket.
To remove the memory module, just push both handles outward,
and the memory module will be ejected by the mechanism in the
socket.