manualshive.com logo in svg

Aaeon SBC-456, User Manual

Share
Download
Aaeon SBC-456 User Manual Download Page 82

74    SBC-456/456E User Manual

Windows

Ô

Ô

Ô

Ô

Ô

 NT 3.51

These drivers are designed to work with Microsoft

Ò 

Windows

Ô.

Driver installation

1. Install Windows

Ô

 NT 3.51 as you normally would for a VGA

display.  Run Windows

Ô

 NT Control Panel from the Main Group.

Choose the Display option.  In the Display Settings dialog box,
click on Change Display Type.  Click on Change from the Adapter
Type in the Display Type dialog box.  Click on Other in the Select
Device dialog box.

 2. Place the Windows

Ô

 NT Display Driver Diskette in drive A.  Press

<ENTER> and the following driver names will appear highlighted in
the Models list box:

     CHIPS Video Accelerator (64310,65545,65548,65550)
     CHIPS  Video Accelerator (65510,65530,65535,65540)

Click on Install to Install the selected driver.  Once the installation
is complete, shutdown and restart the system.

3. Upon restart, at the Invalid Display Selection message, click on

OK and select the desired display settings from the Display
Settings dialog box.  Click on Test to test the newly selected
graphic mode.  A color test screen should appear, followed by the
Testing Mode window.  Click on Yes to contiune.  The Display
Settings Change window will appear.  Click on Restart Now for the
new settings to take effect.

Summary of Contents for SBC-456



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands