MIX-Q370D1
2-14
4. AT/ATX mode selection (3-pin AT_ATX)
Pins
ATX mode (Default)
1-2
AT mode
2-3
Pins
1-2
Enables the chassis intrusion detection feature
3-4
Disables the chassis intrusion detection feature
(Default)
5. Chassis intrusion jumper (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
Move the jumper cap to pins 1-2 when you intend to use the chassis intrusion
detection feature.
MIX-Q370D1
MIX-Q370D1 AT/ATX mode selection
2
1
2 3
ATX mode
(Default)
AT mode
AT_ATX
MIX-Q370D1
MIX-Q370D1 Chassis intrusion connector
Intrudor
Intrudor
No Intrudor
PIN1
CHASSIS
Summary of Contents for MIX-Q370D1
